An angiography system is the core of diagnosis and endovascular treatment of vascular disease, and the model chosen defines what an interventional department can do. Before buying, understand system classes, configurations and what really drives project cost — instead of chasing the maximum configuration without a clinical need.
Classes of angiography systems
Systems are monoplane or biplane and are configured for cardiology, neurointervention or general interventional radiology. A monoplane system covers most peripheral and coronary procedures and costs less to run.
Biplane suites are needed for complex neurovascular procedures, where simultaneous imaging in two projections saves contrast and dose. A multi-specialty hospital usually starts with a monoplane system that can be upgraded later.
Budget, mid-range and premium
The entry segment includes high-end mobile C-arms and simplified fixed systems with basic post-processing — suitable for hospitals starting an interventional service and growing the volume step by step.
Mid-range and premium systems differ in generator power, flat-panel detector size, frame rate and 3D vessel reconstruction software. The final cost depends on class, configuration and brand, so request a quote for your clinical profile rather than a general price list.
New or refurbished
A refurbished angiography system from a major manufacturer can work on a limited budget if it has been fully inspected, wear parts replaced and the condition of the detector and X-ray tube documented.
A new system brings the full warranty and current software — important for frequent complex procedures. Decide together with a supplier who can show the real condition of a specific unit.
Key specifications
Compare detector size and type, fluoroscopy frame rate, dose-reduction protocols and PACS compatibility. Ergonomics of the C-arm stand and table for your procedure mix matter just as much.
Software for quantitative vessel analysis and 3D navigation defines which procedures are realistically possible. Major vendors offer comparable lines, so the choice often comes down to the ecosystem and local service support.
Leasing to ease the budget
An angiography suite is a major investment, and leasing allows a department to open without taking a large sum out of working capital.
When comparing leasing offers, look beyond the monthly payment: service, staff training and warranty extension during the contract define the total cost of ownership.
Logistics, licensing and registration in the UAE
Importing an angiography system involves transport of oversized equipment, customs, MOHAP registration of the device and a FANR licence for radiation equipment, plus room preparation to radiation-protection requirements.
A supplier experienced in the UAE coordinates all stages, from import documents to final acceptance by the interventional team, reducing delays and costly installation mistakes.
Installation, training and service
Installation needs a prepared room: reinforced floor, shielding and ventilation. Installation and commissioning must be done by certified engineers.
After start-up, training of interventionalists and radiographers on acquisition and post-processing protocols and access to local service and original spare parts are critical.
Frequently asked questions
Monoplane or biplane — which do we need?
Monoplane covers most coronary and peripheral procedures; biplane is needed mainly for complex neurovascular work.
How much does an angiography system cost?
It depends on class, detector, software and brand. Send a request and we will prepare a quote for your clinical profile.
Is a refurbished angiography system a good idea?
It can be, if the detector and X-ray tube condition is documented and the supplier provides a warranty.
Which licences are required in the UAE?
MOHAP registration of the device, a FANR licence for radiation equipment and the facility licence from DHA, DOH or MOHAP.
Related articles
- Multislice CT: how to choose a CT scanner for your facility
- CT scanner: how to choose computed tomography for your hospital
- Pulse oximeter: how to choose the right model for your clinic