Medical Examination Light Guide for Hospitals and Clinics

What is an examination light used for

An examination light, sometimes called an examination lamp, lets the clinician see skin, wounds, mucosa and body cavities clearly during a consultation or minor procedure. Typical uses are physical examination, dressing changes, suturing of small wounds, dermatological assessment, gynaecological and ENT examinations, and bedside checks in wards and ICU.

It differs from a surgical light in size, optics and control. Examination lights have smaller heads, a simpler light field and usually no sterile handle or shadow-management electronics. Our comparison of examination and surgical lights covers the dividing line in detail.

Key specifications: lux, field size and colour

Central illuminance at 1 m shows how bright the light is, but compare it with field size and colour quality. SIMEON's Sim.LED 350 and Sim.LED 3000 both give 60,000 lx at 1 m, the Sim.LED 3500+ gives 90,000 lx with a dimming range of 40,000 to 90,000 lx, and the compact Sim.LED 250 gives 25,000 lx at 1 m and 95,000 lx at 0.5 m, which suits close inspection.

Colour rendering decides whether skin tone, redness and cyanosis are shown faithfully. SIMEON states Ra 96 for the 350, 3500+ and 250 and Ra 95 for the 3000. Colour temperature is 4,500 K on the 350 and 3500+, while the Sim.LED 3000 comes as the 3000 F (4,700 K, three field sizes of 180, 230 and 250 mm) and the 3000 MC with three colour temperatures of 3,700, 4,300 and 4,700 K.

Finally, think about the patient: a light that is too bright and too close is uncomfortable, so dimming and a comfortable working distance matter as much as the headline lux.

• Central illuminance at 1 m and dimming range
• Light-field diameter and whether it can be changed
• Colour rendering index (Ra) and colour temperature
• Head weight and arm stability for easy positioning
• LED lifetime and power consumption

Mounting: ceiling, wall or mobile

Decide the mounting by room type. Ceiling versions keep the floor free in busy rooms; wall versions suit consulting rooms with a fixed couch; mobile stands serve rooms where the couch moves or one light covers several spaces. Most SIMEON examination lights, including the Sim.LED 350, 3500+ and 250, are offered in all three versions, and the 250 can also be mounted on a ceiling supply unit.

Read our guide to mobile examination lights for the stand-specific checks. Ask the installer to confirm wall or ceiling strength before ordering, and keep clear access for cleaning behind and above the arm.

Hygiene and daily use

A seamlessly closed housing with an antibacterial coating makes wiping down between patients faster. The SIMEON lights listed here use the Anti.BAC coating and, in several models, scratch-resistant safety glass. Smooth surfaces without ventilation slots also keep dust and fluids out.

Think about positioning: a light head that is easy to move one-handed, an arm that holds position and a handle clear of clutter all improve daily workflow. If the light will be used for small procedures, check the heat and the glare at the working distance rather than just the lux value.

Choosing and ordering for your facility

List your rooms and their uses, decide the minimum illuminance and mounting for each, and standardise on one family where possible to simplify spare parts. Confirm the UAE registration status of the exact model with the supplier, since requirements may change.

Beckfinity can supply SIMEON examination lights and prepare a quotation per room type; contact our specialists to discuss your clinic.