An argon plasma coagulation unit adds non-contact argon coagulation to an electrosurgical generator, either as a docked module or as an integrated function. For endoscopy and OR buyers the selection comes down to a few practical questions: which generators it works with, how flow is controlled, which probes are available, how argon is supplied and what service is behind it. This guide gives you a structured way to compare an argon plasma coagulation system.
Argon plasma coagulation system: what is in the box
An APC system has three layers: the electrosurgical generator that provides high-frequency energy, the argon module that controls gas flow, and the probes or instruments that deliver the plasma. Some manufacturers integrate the argon function in the generator, while others sell a docking module. If you are new to the technique, start with what is argon plasma coagulation.
BOWA's ARC PLUS is an argon unit that docks with the ARC 400 or ARC 350 and turns them into an argon workstation for argon plasma coagulation (APC) and argon-assisted electrosurgery. This modular route lets a hospital start with a generator and add argon later.
Flow control, modes and power
Check the flow range and how it is controlled. The ARC PLUS offers 0.1 to 10 l/min with a maximum outlet pressure of 2 bar. Look at the operating modes: Argon CUT and COAG for open and laparoscopic surgery and gynaecology, and Argon FLEX and PULSED for flexible probes in gastroenterology and internal medicine. Ask how the unit sets power and flow together and whether presets are available.
Instrument recognition reduces errors: the ARC PLUS recognises argon instruments automatically. It lists an argon ignition distance above 10 mm and provides contact-free coagulation of large bleeding surfaces such as the liver. Distances in practice depend on settings and probe.
- Flow range and pressure limits
- Modes for open, laparoscopic and flexible probes
- Automatic probe recognition
- Presets and a clear user interface
Argon plasma coagulation device: probes and gas supply
Probes decide what you can do. Flexible probes pass through endoscope channels; rigid or laparoscopic probes serve surgery. Check probe diameters, lengths, whether they are single-use and the expected cost per case, then read APC probes and APC in endoscopy.
Gas supply is often overlooked. The ARC PLUS holds two argon cylinders with a level indicator and pre-warning, and a mobile ARC CART is available. The unit measures 433 × 97 × 489 mm and weighs 7.7 kg. Plan cylinder storage, regulators and replacement logistics together with your medical gas policy.
Compatibility, service and APC machine price
Confirm which generator versions the module supports, whether software updates are needed and how the module is serviced. For an argon plasma coagulation machine price we do not publish figures; the final cost depends on the generator, module, probes, cylinders, cart, training and service. Compare quotations by listing the same components in each.
Ask an argon plasma coagulation supplier for registration documents, training, installation and the response time for repairs. Beckfinity is an official distributor of BOWA in the UAE. For costs of the underlying generator see electrosurgical generator price.
Checklist and next steps
Before ordering, list the procedures (open, laparoscopic, endoscopic), the generator you have, the probes needed and the gas logistics. Clarify who will train the nurses and endoscopy assistants and how the cylinders will be changed during a list.
To discuss a configuration for your department, request a quote or review the ARC PLUS page.
Frequently asked questions
Can I add APC to my existing generator?
Only if the module is designed for it. The BOWA ARC PLUS docks with ARC 400 or ARC 350 generators.
What gas does an APC unit use?
Medical argon from cylinders. The ARC PLUS holds two cylinders with a level indicator and pre-warning.
Which probes are needed?
That depends on whether you work in open, laparoscopic or endoscopic procedures; flexible probes are used with endoscopes.
Do you publish prices?
No. The cost depends on configuration, probes, cart, training and service, so we prepare a quotation on request.
Related articles
- Electrosurgical Unit Uses: What an ESU Does Across Surgical Specialties
- Monopolar vs Bipolar Electrosurgery: Which Mode for Which Task?
- Smoke Evacuator Guide: Choosing a Surgical Smoke Evacuation System
- ATMOS MEDAP FUMOVAC 700 Smoke Evacuator: Facts and Fit
- Choosing an Argon Plasma Coagulation Probe for Endoscopy and Surgery
- What Is Bipolar Electrosurgery? Principle, Advantages and Typical Instruments
- Endoscopic Argon Plasma Coagulation: Uses and Equipment Needs
- Choosing Bipolar Forceps: Shapes, Coatings and Cable Compatibility
- What Is Argon Plasma Coagulation (APC) and How Does It Work?
- Neurosurgery instruments: the core hand tools and what each one does
- Flexible Ureteroscopy Step by Step: The Equipment at Each Stage
- Portable X-Ray Machine Price in the UAE: Budgeting Factors for Buyers