Perlove PLD9600D all-in-one DR and digital fluoroscopy system

What the PLD9600D is designed to do

PLD9600D is a multifunctional dynamic radiography and fluoroscopy system. It covers general X-ray examinations, digital fluoroscopy and contrast studies such as IVP, HSG and lower-limb venography. For a clinic or a mid-sized hospital, one room that handles both static and dynamic imaging can replace two single-purpose rooms and simplify scheduling.

The system belongs to the Perlove DR family; if you are comparing the wider range, our overview of Perlove Medical DR systems puts the models side by side.

Perlove PLD9600D specifications

The published figures centre on the detector, the table and the fluoroscopy mode. A large 17 × 17 inch dynamic flat panel gives a wide acquisition area, and pulsed fluoroscopy runs at 25 frames per second. The tilting table and a SID of up to 1.8 m cover both table work and chest radiography.

When you compare PLD9600D specifications with other digital R/F systems, use the same sheet for every offer and ask for each value in writing.

• Digital radiography and digital fluoroscopy in one system
• 17 × 17 inch dynamic flat-panel detector
• Pulsed fluoroscopy at 25 frames per second
• IBS automatic brightness and contrast adjustment
• Tilting lifting table; SID extends to 1.8 m
• Optional automatic image stitching

Perlove digital fluoroscopy in daily use

The IBS function adjusts brightness and contrast automatically, which helps maintain a stable image as the anatomy and contrast agent move through the field. To understand how dynamic flat panels behave in fluoroscopy, read our note on the flat panel detector for fluoroscopy.

Typical exams and the way they use an R/F room are listed in the guide to fluoroscopy procedures. Use it to estimate utilisation and decide whether the PLD9600D matches your case mix.

Stitching for orthopaedic planning

Optional automatic image stitching supports pre-operative planning and post-operative evaluation in scoliosis, knee prosthesis and hip replacement cases. If orthopaedics is part of your plan, specify stitching in the tender and ask how the long image is assembled, how calibration for measurement is handled and what the workflow looks like for the radiographer.

Our article on full-spine and long-leg X-ray explains what to check in any stitching function.

Room planning, workflow and dose considerations

A combined DR and fluoroscopy room needs more planning than a plain radiography room. Agree early on where the control area and the lead-glass window will be, how patients enter on stretchers, and where contrast agents and accessories are stored. Fluoroscopy involves staff near the table, so shielding for the room and personal protection for the team should be specified together with the equipment.

For dose management, ask how the system displays and records dose, what pulsed-fluoroscopy settings are available, and whether protocols can be locked per examination type. Our notes on radiation protection in fluoroscopy and fluoroscopy dose reduction list practical measures that apply to any R/F room.

Buying checklist and next step

Before choosing, confirm the following with the supplier: the exact configuration and options, room dimensions and shielding, power requirements, DICOM conformance for your RIS and PACS, training for radiographers, warranty and maintenance coverage. Facility licensing and device registration rules in the UAE should be checked with the relevant authority for your emirate, since requirements are updated from time to time.

Beckfinity specialists can prepare a quote, a room plan and a service proposal for the PLD9600D.