Perlove PLX M5320: a 50 kW mobile DR unit for wards, ICU and OR

Perlove mobile DR PLX M5320 at a glance

PLX M5320 is built for bedside imaging across several hospital areas. A 50 kW high-frequency generator gives stable output, and the unit is motorised and power-assisted, so one operator can move it between wards. The 17 × 17 inch wireless flat-panel detector covers chest, extremity and spine radiography.

For incubators and neonatal units a smaller 10 × 12 inch detector is available as an option, which makes the same platform usable in NICU as well as adult wards. If you are choosing for a neonatal area, ask which detector is supplied as standard and which is optional.

• 50 kW high-frequency generator
• 17 × 17 inch wireless detector; optional 10 × 12 inch for incubators and NICU
• Supercapacitor for exposures plus a separate lithium battery for driving
• Ultrasonic distance measurement for positioning
• Motorised, power-assisted movement
• DICOM 3.0 workstation for PACS transfer

Power system: supercapacitor and lithium battery

The unit separates two power functions. A supercapacitor powers the exposures, while a separate lithium battery drives the unit. This helps keep exposure performance independent from the drive, though the practical consequence for you is charging discipline: ask how long a full charge takes, how many exams a charge supports and where charging points should be installed.

Also ask whether the unit can be used while plugged into a wall socket and what the service plan for the battery and capacitor looks like.

Positioning aids and workflow

Ultrasonic distance measurement simplifies bedside positioning by helping the operator set the source-to-image distance consistently. Consistent distance matters in ICU, where serial chest films are compared from day to day.

A DICOM 3.0 workstation sends images to PACS. For the DICOM services to request from any supplier, see connecting DR systems to PACS.

Choosing a mobile DR: criteria that matter

Compare mobile units on the same checklist: generator power, detector size and options, battery type and charging, drive and manoeuvrability, collimator and positioning aids, software and DICOM, and service support. Our portable X-ray buying guide and the overview of mobile X-ray unit types explain these criteria in more detail.

If you work in intensive care, read bedside X-ray in ICU for infection control, positioning and staff protection. For a Villa alternative with motorised drive, compare the Visitor T30 M-DR.

Where the PLX M5320 fits in a hospital

In a radiology department the unit serves patients who cannot travel to the X-ray room. In wards and ICU it is used for serial chest films, line and tube checks and extremity studies. In the operating room it supports intra-operative imaging when a mobile detector-based system is sufficient. In each area the same practical questions arise: can the unit reach the bed through the doorway, is there room beside the bed for the operator to stand at a safe distance, and can the detector be placed under or behind the patient without discomfort.

Plan staff training as carefully as the purchase. Operators should know the positioning aids, the safe handling of the wireless detector and the correct way to send, review and reject images. A short onsite training programme and a quick-reference card at the unit often prevent repeat exposures, which is both a dose and a throughput benefit.

Questions for the supplier and next step

Ask for the configuration in writing, the detector protection and cleaning guidance, the DICOM conformance statement, the training plan and the service terms. Confirm device registration and facility requirements with the relevant UAE authority.

Beckfinity specialists can prepare a quote for the PLX M5320 and advise on the best detector and service arrangements for your wards.