BOWA ERGO 300 Morcellator: What a Gynaecology Department Should Know

What the ERGO 300 is designed to do

The ERGO 300 is BOWA's system for morcellation and extraction of tissue in laparoscopic hysterectomy and myomectomy, including removal of fibroids and the uterus. A rotating cylindrical blade cuts the specimen into strips that are drawn out through the working tube, so a large specimen can leave the abdomen through a small port.

It is a reusable, electromechanical design. The motor, gear unit and handle components are prepared in the sterile processing department and set up in the sterile field, which suits departments that want to avoid per-case disposable motor units. Anyone comparing a BOWA morcellator with other options should start from the procedure mix rather than from the catalogue.

What is in the basic set

According to the manufacturer data, the basic set includes the control unit, an autoclavable micro motor with a 3 m cable, a gear unit with seals, a handle, an obturator and a protective sleeve. Application sets are available for 12 mm and 15 mm working diameters.

The two diameters are a practical decision point. The smaller tube fits fibroid and partial specimens and keeps port size down; the larger one moves tissue faster when specimens are bulky. Many departments hold both so the surgeon can choose per case.

• Control unit with Vario foot switch and 3 m cable
• Autoclavable micro motor
• Gear unit with seals, handle, obturator and protective sleeve
• Application sets for 12 mm and 15 mm working diameters

Speed control and safe insertion

Cutting speed is controlled between 50 and 1000 rpm through the Vario foot switch, so the surgeon changes speed with the foot and keeps both hands on the instruments. Lower speeds give finer control near the end of a strip; higher speeds help with firm fibroid tissue. For a general explanation of how rpm, suction and grip interact, see our guide to morcellator speed settings.

The blade can be deactivated for insertion, which matters because the instrument is passed through the abdominal wall with the cutting edge inside the tube. Teams should include this step in the theatre checklist: confirm the blade state before insertion, and activate only under direct vision.

Pairing with the MetraBag pro containment bag

The ERGO 300 can be combined with MetraBag pro, a sterile containment bag for morcellation inside an enclosed space. The bag is inserted through a 10 mm trocar, holds 3.5 litres, is transparent so surrounding structures remain visible, and has three colour-coded ports that can be closed. CO₂ insufflation of the bag creates working room. The manufacturer states it is intended to reduce the risk of abnormal cell dissemination.

Regulators and professional societies in several countries have issued cautions about uncontained power morcellation of uterine tissue, so case selection and the use of containment are decisions for the surgeon and the hospital. Our article on morcellation safety and containment bags covers what to include in a local protocol.

Reprocessing, service and buying questions

Because the motor and handpiece parts are reusable, follow the manufacturer's instructions for use for cleaning, lubrication and autoclaving cycles, and log each set so wear on seals and the gear unit can be tracked. Ask the supplier for the reprocessing validation documents, spare seal availability and the service route inside the UAE.

Also confirm the registration status of the model with the relevant UAE authority (MOHAP at federal level; DHA in Dubai and DOH in Abu Dhabi license facilities), as requirements change. For wider context on devices in this class, read the tissue morcellator guide and the note on gynaecologic laparoscopic morcellators.

Next step

Beckfinity can arrange a product demonstration, a quote for the ERGO 300 set with 12 mm and 15 mm applications and MetraBag pro, and installation training for your theatre team. Contact our specialists with your procedure volumes and we will help you size the configuration.