NOUVAG HighSurg 30: Dual-Motor High-Speed Console Explained

What the HighSurg 30 is

HighSurg 30 is a surgical motor console from NOUVAG AG of Switzerland. Its dual-motor concept means two electronic motors can be connected at the same time, each fitted to the handpiece the procedure requires. The surgeon switches between them without reconnecting cables, which can shorten set-up changes in a long case.

The console works with a wide range of NOUVAG handpieces. It is a mains-powered unit with a foot switch, and it belongs to the high-speed class of surgical motors discussed in our article on the high-speed surgical drill.

Key specifications

The documented specifications are straightforward: maximum speed 80,000 rpm, maximum torque 7.5 Ncm, power consumption 120 VA, dimensions 260 x 250 x 110 mm and a weight of 3.5 kg. The foot switch is rated IPX8, which indicates a high level of protection against water ingress.

A high-speed, moderate-torque profile is typical for burring and fine bone work rather than heavy drilling. For lower-speed, higher-torque tasks, other NOUVAG control units exist, so match the console to your procedures. See the HighSurg 30 product page for the full data.

• Speed: up to 80,000 rpm.
• Torque: up to 7.5 Ncm.
• Power: 120 VA; weight 3.5 kg; 260 x 250 x 110 mm.
• Foot switch: multifunction, IPX8.

Controls, display and pump

The HighSurg 30 has a clear multifunction display and customisable programs, so frequently used settings can be recalled quickly. The multifunction foot switch supports precise, low-fatigue operation. A quiet pump handles irrigation, and tube replacement is simplified, which saves time in sterile preparation.

When evaluating the console, ask for a demonstration of program setup, foot switch behaviour and irrigation flow adjustment. Confirm which tubing sets are used and how often they need to be replaced.

In practice, hospitals tend to ask three questions about a high-speed console: how long it stays cool and consistent in a long case, how easily irrigation is managed, and how quickly the theatre team can set it up. The documented design points, a quiet pump, simplified tube change and customisable programs, address the last two directly; for the first, ask the supplier for guidance on duty cycles and handpiece care.

Handpieces and applications

The console drives handpieces from the NOUVAG range; the exact selection depends on your procedure and the compatibility list from the supplier. NOUVAG's portfolio includes craniotome and cranial perforator handpieces, ENT shaver handpieces and handpieces for reconstructive work, so a single console can be a hub for several tasks.

Buyers sometimes confuse high-speed consoles with lower-speed systems. For skin grafting and general reconstructive tasks, see how the electric dermatome system is organised, and for a broader view read our guide to the surgical motor system.

Think also about the people using it. A console with two motor ports lets a surgeon and an assistant prepare two handpieces before the case, which is helpful in ENT and skull base work where burrs and other tools alternate. Include nurses and sterile services staff in the training plan so that connection, cleaning and storage routines are consistent.

Buying checklist for the UAE

Request a written compatibility list, the instructions for use for motors, cables and handpieces, and details of the reprocessing cycle. Check electrical safety documentation, installation and training, and the service route and spare motor policy in the UAE.

Medical devices are registered with the relevant authority; confirm current requirements for your facility before ordering.

• Compatibility list of handpieces for each motor.
• Reprocessing instructions and cycle limits.
• Spare motor and cable availability.
• Training and preventive maintenance.

Request a demonstration

Beckfinity is the official UAE distributor of NOUVAG. To arrange a demonstration of the HighSurg 30 or request a quotation, contact our specialists.